20091105

Aperture f Number

The aperture measurement, the f number, is derived from a ratio. This ratio is the diameter of the hole which lets the light through divided by the focal length of the lens. For example the old lens I use as a magnifying glass has a 25mm diameter and 50mm focal length. Divide the 25 by 50 to get 1/2 (ie half). The f number is the lower part of the fraction, the denominator, f2. This is the maximum aperture of the lens. Each increase in f number represents half the amount of light entering the camera. So changing from f8 to f11 has the same reduction in light into the camera as changing from 1/250th to 1/500th of a second exposure. This also means that 1/500th at f8 lets in the same amount of light as 1/250th at f11 or 1/60th at f22. f22 is a typical minimum aperture. When the aperture gets smaller (bigger number) the effect of the glass lens is reduced and the lens starts to behave as a pinhole camera. A manual lens should have marks either side of the 'focus' mark with f numbers These indicate the manufacturer's suggested range of acceptable focus for the f number. This means the f4 marks will be closer to the 'focus' mark than the f16 marks. This is called 'depth of field'.

When a lens has a longer focal length the diameter of the lens has to be increased to have the same f number. For example a 200mm focal length (telephoto) lens needs a 100mm diameter to have a f2 maximum aperture.

Recruitment Agencies

Recruitment Agencies are CRIMINALS. They continually commit the crime of AGE DISCRIMINATION! Date of birth is their most important selection criteria all telecoms and IT positions. They have destroyed my careers in these fields.